Origami: How to Fold a Paper Crane Part 4
Page 1 / Page 2 / Page 3 / Page 4 / Origami Page
The following steps correspond to the images above. Read the images top left first, top right second, second left third, second right fourth and so on.
25. Fold the opposite corner the same way completing the paper airplane-like fold.
26. Grab the side corners on the front and make them touch. Then grab the side corners on the back and make them touch. There should be two legs that extend downward.
27. Grab one of the legs and pull it outward, allowing the side to open slightly so you can invert the fold to make the neck of the crane,
28. Do the same thing to the other leg to make the tail of the crane.
29. Invert a small section on the neck to mimic the head of the crane. If you did it right, the nose should be a perfectly sharp point.
30. Bend the center flap down to create the wing, then turn the bird over.
31. Bend the other flap down to create the other wing.
32. The last step is to get rid of the point on the cranes back. If you pull out on the sides of the point, you will be able to press the point inwards, hiding the point inside the crane.
That’s it. You made your own crane. I hope my instructions were easy enough to follow. The pictures should have helped.
